GNPROGFULL

Features GNPROGFULL

Program Full version for the management and control of the GN Automation generators.
with this program will be possible in addition to the monitoring and changes of the recorded values ​​present in the free version, the following operations:- turn the generator off and on remotely in automatic mode.- carry out transfer of the load to the generator and to the grid or even disconnect the load from the two.-Install the generator in automatic or manual mode.-proceed generator failures.-make the generator operating hours counter.-you can track the amount of fuel in the generator tank- It is possible to program hours and days of the week to switch on the generator by switching the load from the external grid to the same one (much used for Pico time, where the concessionaires usually charge more in this time period).-It will also be possible to program interval of hours and days of the week to keep the generator off even if there is power failure.-the clock present in the HMI as well as the module connected to the generator board can be read and / or configured via the application